Hello,
I would like to inquire about your Graphical COG LCDs
we are currently working on a project and we need an LCD with reasonable price
This LCD will be used in to display gathered data from electrical panels
We need 10 pcs for sampling purposes.
product: TSG12864I
it would be appreciated if you could provide us with pricing and datasheet forit
also if you have any recommendation with the following pecs it will be highly appreciated :
minimum active area around 60 x 30 mm or larger and display mode STN of FSTN
for the interface MCU,SPI,I2C all is fine as long it supports Arduino but I2C and SPI will work best, also an FPC connection
Thanks
Best Regards,
Nadine
ip:154.180.98.55
Subject:[First Page Inquiry] Dispensador de combustible panel LCD tipo personalizadoTime:2023-09-24 05:57:23
I need this producto, the dame one in the imagen, quote 100 pice
Good morning,
I would like to know if you have screens between 4 and 5 inches, with SPI control bus and the screen must be HMI, with more than 500 nits and capacitive touch.
Thank you so much.
ip:85.61.91.168
Subject:[First Page Inquiry] 5.5'' IPS TFT LCD Display with 720x1280 dots with MIPI interfaceTime:2023-09-13 14:15:49
Please send me quote for 1000 pcs.
Regads Marcin Kowalczyk
ip:185.39.46.56
Subject:[First Page Inquiry] 5.5 inch 720*1280 res. MIPI interface with capacitive touchTime:2023-09-12 13:47:18
need product complete information with source code
ip:49.207.57.170
Subject:[First Page Inquiry] 5.5 inch 720*1280 res. MIPI interface with capacitive touchTime:2023-09-11 15:53:34
Require specification in details, display code driver code available or not, which controller is suitable