Subject:[First Page Inquiry] TSD 2.8 inch 480x480 resolution circule tft lcd display with wide temperatureTime:2026-03-03 14:07:12

您好,這款型號TST028WVBS-S64,請幫忙提供量產及樣品報價,謝謝

ip:61.222.86.13    

Subject:[First Page Inquiry] 3.0 Inch 432xRGBx432 RGB Interface HX8363-A IC TFT LCD Display Module 1000 nits Normally Black 50g TFT Display ScreenTime:2026-03-03 07:27:48

Hello, I am interested in your 3.0 inch 432×432 RGB TFT module with the HX8363-A driver and 1000 nits brightness. Could you please provide: 1. Confirmation of resolution (432×432 or 320×240) 2. Full datasheet (mechanical + electrical) 3. Backlight driving requirements (current, voltage) 4. MOQ 5. Unit pricing for: - 1–2 pcs (evaluation samples) - 5 pcs - 100 pcs - 1000 pcs 6. Lead time for samples and production I am currently evaluating the display for an embedded system project using an STM32H7 microcontroller. I would like to purchase 1–2 units initially for validation and testing before moving to larger quantities. Thank you. Best regards, Samuel O’Hearne

ip:72.208.221.227    

Subject:[First Page Inquiry] Leave a MessageTime:2026-03-01 10:02:04

We drive targeted visitors straight to your website - and your campaign can go live by tomorrow. Can I send you a quick example?

ip:170.247.223.149    

Subject:[First Page Inquiry] Inquiry InfoTime:2026-02-28 22:41:04

Hello, I am requesting a quote and technical feasibility review for a custom FSTN graphic LCD module. The specifications below are preliminary and provided for quotation purposes. Final confirmed drawings and dimensions will be provided prior to tooling. Preliminary Target Specifications: Viewing Area: Approximately 66 mm × 30 mm (minor dimensional adjustments acceptable for cost optimization) Resolution: Approximately 100 × 30 active pixels (graphic area) Approximately 10–20 indicator icons positioned above the main graphic area Preferred implementation: Use a standard 128 × 32 graphic controller architecture and map the visible area within that structure. Icons/indicators may be mapped into unused dot rows of a 128 × 32 controller to simplify design. Any unused rows or columns may remain electrically present but not visible. Display Type: FSTN, positive mode, reflective (no backlight) Style: black/very dark blue segments on gray background (similar to JAZZ-BC-W) Custom viewing angle (please advise available options such as 6 o’clock or 12 o’clock) Interface: SPI required Parallel interface optional (please quote both if available) Controller should preferably be compatible with common open-source libraries such as u8g2 (e.g., ST7565/ST7567 compatible or equivalent 128 × 32 controller) Mechanical Requirements: (COG area height) target ≤ 3 mm Standard COG construction preferred COG on top; viewing angle optimized for correct contrast in normal user orientation (similar to 6 o’clock angle with top COG) COF is not required if COG height remains ≤ 3 mm Custom FPC length (to be finalized; please advise tooling implications) Electrical: Software-controlled contrast via controller command (no external potentiometer required) Low-power passive drive suitable for embedded MCU (ESP32-class) Cost Optimization Preference: Preference is given to solutions utilizing an existing 128 × 32 controller platform to minimize tooling (NRE) and unit cost. If minor dimensional or pixel adjustments improve cost efficiency, please advise recommended changes. Please provide: Tooling (NRE) cost Unit pricing at different MOQs (e.g., 500 / 1000 / 3000 pcs) Estimated lead time for tooling and mass production Thank you for your time. I look forward to your technical feedback and quotation. Best regards, Jesus E Ruiz

ip:73.171.134.63    

Subject:[First Page Inquiry] TSD 7 inch tft lcd monitor touch screen 800x480 with RGB interfaceTime:2026-02-27 17:12:01

TST070WVBE-33C with CTP Price at 50 units, 100 units

ip:1.47.74.43    

Subject:[First Page Inquiry] Leave a MessageTime:2026-02-26 14:49:51

Hi Please get me a price for 1000pcs of TSD 480x480 resolution 3.4 inch automotive tft display square lcd module. Best Regards

ip:5.190.48.146    

Subject:[First Page Inquiry] Leave a MessageTime:2026-02-26 03:37:06

Below are the details for part that we want: We need a 7.0" class display that fits a compact “phone-like” handheld enclosure and integrates cleanly into our electronics stack: Device envelope: 166.0 × 79.5 × 9.3 mm Target display class: 7.0" (slightly larger than a 6.9" phone screen) Preference for MIPI-DSI interface, good brightness for mixed indoor/outdoor use, and reliable supply for pilot + production. If you can, please recommend the best part number(s) that match the above or better and share: Mechanical drawings (module outline + AA/VA + FPC details) Interface/power requirements Pricing tiers (sample / 100 / 500 / 1k+), MOQ, and lead time Thank you again, and I look forward to your recommendation. Kind regards, Victor Brown

ip:204.191.55.196    

Subject:[First Page Inquiry] TSD 5 inch Tft LCD Display Sunlight Readable TN LCD PanelTime:2026-02-25 14:22:24

want 5 inch display with 16:9 aspect ratio and MIPI interface, sunlight readable brightness>1000cd

ip:49.36.58.165    

Subject:[First Page Inquiry] TSD 5 inch TFT LCD Module IPS Screen with capacitive touch panelTime:2026-02-25 14:15:05

need Aspect ratio 16:10 for 5 inch display, MIPI interface, Brightness >1000cd sunlight readable.

ip:49.36.58.165    

Subject:[First Page Inquiry] TSD 1280x800 resolution 10.1 inch IPS LCD display with Resistive touch screenTime:2026-02-25 11:50:05

Hello, This is Ryan of CM CONNECT Co., LTD. our company is distributor of LCDs in Korea. We are looking for 10.1 inch 1280 x 800 LCM ( 45pins, HX8245+HX8695+HX8861-H11( timing controller IC ) ). I think TST101WXBN-16P is similar to the product we're looking for. we hope to get information more. Please reply me. Thank you. Best Regards. Ryan Choi,

ip:1.242.129.138